Venas UL Type A+B Dual Model Tube

Detailed Data：

- Life Span: 50,000 Hours

- Weight: 240g

- Led Chip: 60 pieces of SMT 2835

- Power Factor: More than 0.95

- Efficiency: l30 lm/W

- Certificates: UL, cUL, RoHS

Model List：

Installation Instruction：

- Check the ballast installed in the field and make sure the ballast is in manufacturer's ballast list.

- Loose and damaged lamp holder and socket need to be adjusted or be replaced.

"Plug" and "Play" procedure

- Turn off the power to the light fixture at the breaker panel before installation.

- Open the diffuser from the light fixture.Ensure pins are firmly seated in lampholders.

- Remove the flourescent tubes, Please dispose of these items properly as they contain mercury.

- Put led tube into the lighting fixture.

- Install the Led tube,close the diffuser.

- Turn on the power.

Caution：

- Use only with specific electronic ballast.

- Risk of fire.Loose or damaged end cap and lampholder need to be replaced before installation.

- Risk of electric shock. Make installation with gloves.

- Use only in place of fluorescent lamps specified on label.

- This lamp is intended for use with emergency exists.

- These lamps are to be used in indoor damp location only. Do not suitable for wet location.

- These lamps works with a light dimmer.

- If the lamp or luminaire exhibits undesirable operation (Buzzing, Flickering, etc), immediately turn off power, remove lamp from luminaire and contact manufacturer.

- This lamp only operates on electronic ballasts.If lamp does not light when the luminaire is energized, remove this lamp from luminaire and contact manufacturer.

- Do not make mass installation before sample testing.

Warranty：

• Only offer 3 year's or 5 year's warranty or any other warranty period specified in the contract for the product from the date of purchase:

• Invoice or shipment bill is required to

claim the warranty.

• The warranty policy only requires manufacturer to repair the defective product or send substitute for replacement.

• Installation labor, electricity cost and other related cost will not be covered by the manufacturer warranty policy.

• Warranty doesn't cover the defect caused by inappropriate use, especially if directions of the instructions for use are not observed, normal abrasion as well as failures which affect the value or use of the product insignificantly.

Some externally hosted manufacturer images could not be retrieved. Confirm any missing specifications before ordering.

Specifications supplied in the Venas manufacturer product page. Confirm the selected model and availability when enquiring.